Control Access to the Internet
123
AC750 Wireless Dual Band Gigabit Router R6050
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Guest Network.
5. Select any of the following wireless settings:
• Enable Guest Network. When this check box is selected, the guest network is
enabled, and guests can connect to your network using the SSID of this profile.
• Enable SSID Broadcast. If this check box is selected, the wireless access point
broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt
the correct SSID for connections to this access point.
• Allow guest to see each other and access my local network. If this check box is
selected, anyone who connects to this SSID has access to your local network, not
just Internet access.
6. Give the guest network a name in the Name (SSID) field.
The guest network name is case-sensitive and can be up to 32 characters. You then
manually configure the WiFi devices in your network to use the guest network name in
addition to the main SSID.
7. Select a security option.
The WPA2 options use the newest standard for the strongest security, but some older
computers and WiFi devices cannot use it. NETGEAR recommends that you select the
WP
A-PSK [TKIP] + WPA2-PSK [AES] radio button. This setting protects your WiFi
network and lets computers and WiFi devices can connect to the WiFi network by using
either WPA2 or WPA security.
8. Click the Apply button.
Your settings are saved.
Use Keywords to Block Internet Sites
You can use keywords to block certain Internet sites from your network. You can use
blocking continuously or based on a schedule.
To Next Page
Loading...
Need help?
General
