NETGEAR R6050

Specify Internet Port Settings
141
AC750 Wireless Dual Band Gigabit Router R6050
7. In the Service Name field, type a descriptive service name.
8. From the Service User list, select a user option:
• Any (the default) allows any computer on the Internet to use this service.
• Single address restricts the service to a particular computer
. You must enter the IP
address to which you want to grant access.
9. Select the service type, either TCP or UDP or TCP/UDP (both).
If you are not sure, select TCP/UDP.
10. In the T
riggering Port field, enter the number of the outbound traffic port that will open the
inbound ports.
11. In the Connection T
ype, Starting Port, and Ending Port fields, enter the inbound
connection port information.
12. Click the Apply button.
The service is added. You must enable port triggering before the router uses port
triggering for the service that you added. See Enable Port Triggering on page 141.
Enable Port Triggering
 To enable port triggering:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Advanced Setup > Port Forwarding/Port Triggering.