Supplemental Information
156
AC750 Wireless Dual Band Gigabit Router R6050
Factory Default Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object
to press and hold the Restore Factory Settings button on the router for at least seven
seconds. The router resets, and returns to the factory configuration settings shown in the
following table.
Table 3. Router default settings
Feature Default Setting
Router login URL http://www.routerlogin.net or http://www.routerlogin.com
Login name (case-sensitive) admin (printed on product label)
Login password (case-sensitive) password (printed on product label)
WAN MAC address Default hardware address (printed on product label)
MTU size 1500
LAN IP address (gateway IP address) 192.168.1.1 (printed on product label)
Router subnet 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
Time zone GMT or other time zone setting based on your product SKU
Adjust for daylight saving time Disabled
Allow a registrar to configure this router Enabled
Wireless communication Enabled
Preset SSID NETGEARxx (xx refers to two random digits)
Security option password Preset password (printed on product label)
Wireless access list (MAC filtering) All wireless stations allowed
Broadcast SSID Enabled
Transmission speed Auto
Maximum wireless signal rate derived from IEEE Standard 802.11
specifications. Actual throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building
materials and construction, and network overhead lower actual
data throughput rate.
Country/Region United States in NA only; otherwise, varies by country and region
RF channel Auto until region selected
Operating mode 2.4 GHz 300 Mbps and 5 GHz 450 Mbps
To Next Page
Loading...
Need help?
General
