EasyManuals Logo

NETGEAR R6200 User Manual

NETGEAR R6200
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Table 1. Front panel LED descriptions
LED Description
Power
Solid amber. The router is starting up.
Blinking amber. The firmware is upgrading, or the Restore Factory Settings button was
pressed.
Solid green. The
router
is ready.
Blinking green. The firmware
is corrupted. See www.netgear.com/support.
Off. Power is not supplied to the router.
Internet
Solid green. The Internet connection is ready.
Solid amber. The Ethernet cable connection to the modem has been detected.
Off
. No Ethernet cable is connected to the modem.
Wireless
Solid blue. The wireless radio is operating in either 2.4 GHz or 5 GHz mode.
Blinking: The router is in WPS mode.
Off
. The wireless radios are off for both 2.4 GHz and 5 GHz.
USB
Solid blue: The router has accepted the USB device. The USB device is ready to be used.
Blinking blue: A USB HDD is plugged in and is trying to connect.
Off
: No USB device is connected, someone clicked the Safely Remove Hardware button and
it is now safe to remove the attached USB device.
Hardware Setup
10
Dual Band 11ac WiFi Router R6200
The WiFi and WPS buttons toggle the WiFi and WPS functions on and off.
WiFi On/Off button. Pressing and holding the wireless LAN button for 2 seconds turns
the 2.4 GHz and 5 GHz wireless radios on and of
f. If the 2.4 GHz and 5 GHz LEDs are lit,
then the wireless radio is on. If these LEDs are off, then the wireless radios are turned off
and you cannot connect wirelessly to the router.
WPS button.
Y
ou can use this button to use WPS to add a wireless device or computer
to your wireless network. The Wireless LED blinks blue when the router is trying to add
the wireless device or computer. The LED stays solid blue when wireless security is
enabled in the router.

Table of Contents

Other manuals for NETGEAR R6200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR R6200 and is the answer not in the manual?

NETGEAR R6200 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
Bandwidth2.4 GHz
Rack mountingNo
Ethernet LAN (RJ-45) ports5
Web-based management-
Security algorithmsWPA, WPA2-PSK, WPS
Flash memory16 MB
CertificationRoHS, WEEE, CEC
Internal memory128 MB
Windows operating systems supportedWindows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Weight and Dimensions IconWeight and Dimensions
Depth77 mm
Width205 mm
Height255 mm
Weight654 g

Related product manuals