Advanced Settings
107
Dual Band 11ac WiFi Router R6200
2. Select the IPv6 connection type from the list. Your Internet service provider (ISP) can
provide this information.
• If your ISP did not provide details, you can select IPv6 T
unnel.
• If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
•
If your Internet connection does not use PPPoE, DHCP
, or fixed, but is IPv6, then
select
IPv6 auto config.
3. Click Apply so that your changes take effect.
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic that passes through your
router Internet port. With the Traffic Meter utility, you can set limits for traffic volume, set a
monthly limit, and get a live update of traffic usage.
To monitor Internet traffic:
1. Click Advanced > Advanced Setup > T
raffic Meter to display the following screen:
Scroll to
view more
settings
2. To enable the Traffic Meter, select the Enable Traffic Meter check box.
3. If you want to record and restrict the volume of Internet traffic, select the
Traffic volume
control by radio button. You can select one of the following options for controlling the traffic
volume:
No Limit. No restriction is applied when the traffic limit is reached.
Download only. The restriction is applied to incoming traf
fic only.
Both Directions. The restriction is applied to both incoming and outgoing traf
fic.
4. You can limit the amount of data traffic allowed per month by specifying how many Mbytes
per month are allowed or by specifying how many hours of traf
fic are allowed.
5. Set the T
raffic Counter to begin at a specific time and date.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
