Advanced Settings
104
Dual Band 11ac WiFi Router R6200
Remote Management
The remote management feature lets you upgrade or check the status of your R6200 WiFi
Router over the Internet.
To set up remote management:
1. Select Advanced > Advanced Setup > Remote Management
.
Note: Be sure to change the router’s default login password to a secure
password. The ideal password contains no dictionary words from any language
and contains upper-case and lower-case letters, numbers, and symbols. It can
be up to 30 characters.
2. Select the T
urn Remote Management On
check box.
3. Under Allow Remote Access By, specify the external IP addresses to be allowed to access
the router’
s remote management.
Note: For enhanced security, restrict access to as few external IP addresses
as practical.
• To allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address that will be allowed access.
• To allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
• To allow access from any IP address on the Internet, select Everyone.
4. Specify the port number for accessing the management interface.
Normal web browser access uses the standard HTTP service port 80. For greater
security
, enter a custom port number for the remote web management interface. Choose
To Next Page
Loading...
Need help?
General
Weight and Dimensions
