NETGEAR R6200

Administration
74
Dual Band 11ac WiFi Router R6200
View Router Status
 To view router status and usage information:
Select Advanced Home or select Administration > Router Status to display the following
screen:
Router Information
Hardware Version. The router model.
Firmware Version. The version of the router firmware. It changes if you upgrade the router
firmware.
GUI Language V
ersion. The localized language of the user interface.
LAN Port.
• MAC Address. The Media
Access Control address. This is the unique physical address
that the Ethernet (LAN) port of the router uses.
• IP Address. The IP address that the Ethernet (LAN) port of the router uses.
The default
is 192.168.1.1.
• DHCP Server. Identifies whether the router’s built-in DHCP server is active for devices on
the LAN.
Internet Provider (WAN) Setup
MAC Address. The Media Access Control address, which is the unique physical address
that the Internet (WAN) port of the router uses.
IP Address. The IP address that the Internet (WAN) port of the router uses. If no address is
shown or the address is 0.0.0, the router cannot connect to the Internet.