Hardware Setup
8
Dual Band 11ac WiFi Router R6200
Unpack Your Router
Open the box and remove the router, cables, and installation guide.
Ethernet cable
Dual Band WiFi Router
Power adapter
Figure 1. Check the package contents
Your box contains the following items:
• Dual Band 11ac WiFi Router R6200
• AC power adapter (plug varies by region)
•
Category 5 (Cat 5) Ethernet cable
• Installation guide with cabling and router setup instructions
If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton and original packing materials, in case you return the product for repair
.
Position Your Router
The router lets you access your network from virtually anywhere within the operating range of
your wireless network. However, the operating distance or range of your wireless connection
can vary significantly depending on the physical placement of your router. For example, the
thickness and number of walls the wireless signal passes through can limit the range. For
best results, place your router:
• Near the center of the area where your computers and other devices operate, and
preferably within line of sight to your wireless devices.
• So it is accessible to an AC power outlet and near Ethernet cables for wired computers.
•
In an elevated location such as a high shelf, keeping the number of walls and ceilings
between the router and your other devices to a minimum.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
