EasyManuals Logo

NETGEAR R6200 User Manual

NETGEAR R6200
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
Advanced Settings
88
Dual Band 11ac WiFi Router R6200
computers. To configure this mode, you have to know the MAC addresses of the child
repeater access point.Often, the MAC address is on the product label.
Wireless Repeater. The router sends all traffic from its local wireless or wired computers to a
remote access point. To configure this mode, you have to know the MAC address of the
remote parent access point.
The R6200 router is always in dual band concurrent mode, unless you turn off one radio. If
you enable the wireless repeater in either radio band, the wireless base station or wireless
repeater cannot be enabled in the other radio band. However, if you enable the wireless base
station in either radio band and use the other radio band as a wireless router or wireless base
station, dual band concurrent mode is not af
fected.
To set up a wireless network with WDS, both access points have to meet the following
conditions:
Both access points have to use the same SSID, wireless channel, and encryption mode.
Both access points have to be on the same LAN IP subnet. That is, all the access point
LAN IP addresses are in the same network.
All LAN devices (wired and wireless computers) are configured to operate in the same
LAN network address range as the access points.
Wireless Repeating Function
To view or change the wireless repeater settings for the router:
Select Advanced > Advanced Setup > W
ireless Repeating.
Scroll to
view
more
settings
The following settings are available:
Enable Wireless Repeating Function. Select the check box for the 2.4 GHz or 5 GHz
network to use the wireless repeating function.

Table of Contents

Other manuals for NETGEAR R6200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR R6200 and is the answer not in the manual?

NETGEAR R6200 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
Bandwidth2.4 GHz
Rack mountingNo
Ethernet LAN (RJ-45) ports5
Web-based management-
Security algorithmsWPA, WPA2-PSK, WPS
Flash memory16 MB
CertificationRoHS, WEEE, CEC
Internal memory128 MB
Windows operating systems supportedWindows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Weight and Dimensions IconWeight and Dimensions
Depth77 mm
Width205 mm
Height255 mm
Weight654 g

Related product manuals