Advanced Settings
89
Dual Band 11ac WiFi Router R6200
• Wireless MAC of this router. This field displays the MAC address for your router for
your reference. You will need to enter this MAC address in the corresponding Wireless
Repeating Function screen of the other access point you are using.
• W
ireless Repeater. If your router is the repeater, select this check box.
Repeater IP Address. If your router is the repeater
, enter the IP address of the other
access point.
Disable Wireless Client Association. If your router is the repeater, selecting this check
box means that wireless clients cannot associate with it. Only LAN client associations are
allowed.
- If you are setting up a point-to-point bridge, select this check box.
- If you want all client traf
fic to go through the other access point (repeater with wireless
client association), leave this check box cleared.
Base Station MAC Address. If your router is the repeater
, enter the MAC address for the
access point that is the base station.
• Wireless Base Station. If your router is the base station, select this check box.
Disable Wireless Client Association. If your router is the repeater
, selecting this check
box means that wireless clients cannot associate with it. Only LAN client associations are
allowed.
Repeater MAC Address (1 through 4). If your router is the base station, it can act as the
“parent” of up to 4 other access points. Enter the MAC addresses of the other access
points in these fields.
Set Up the Base Station
The wireless repeating function works only in hub and spoke mode. The units cannot be
daisy-chained. You have to know the wireless settings for both units. You have to know the
MAC address of the remote unit. First, set up the base station, and then set up the repeater.
To set up the base station:
1. Set up both units with the same wireless settings (SSID, mode, channel, and security).
The wireless security option has to be set to None or WEP
.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
