The BASIC Home page displays.
4. Select Guest Network.
Your router might display information that is different from this example.
5. Scroll to the section of the screen for the guest WiFi network that you want to set up.
The default guest wireless network names (SSIDs) are as follows:
•
NETGEAR-Guest is for the 2.4 GHz WiFi band.
•
NETGEAR-5G-Guest is for the 5 GHz WiFi band.
6. Leave the Enable SSID Broadcast check box selected.
Allowing the router to broadcast its wireless network name (SSID) makes it easier to find your network
and connect to it. If you clear this check box, that creates a hidden network.
7. Give the guest network a name.
The guest network name is case-sensitive and can be up to 32 characters.You then manually configure
the wireless devices in your network to use the guest network name in addition to the main SSID.
8. For the wireless channel and mode, leave the default settings selected.
9. Select a security option.
The WPA2 options use the newest standard for the strongest security. WPA2 is the default setting.
10. Click the Apply button.
Network Settings
140
To Next Page
Loading...
