The Basic Settings spage displays.
5. From the Internet Connection Type menu, select the IPv6 connection type:
•
If your ISP did not provide details, select IPv6 Tunnel.
•
If you are not sure, select Auto Detect so that the router detects the IPv6 type that is in use.
•
If your Internet connection does not use PPPoe or DHCP, or is not fixed, but is IPv6, select Auto
Config.
Your Internet service provider (ISP) can provide this information. For more information about IPv6
Internet connection, see the following sections.
• Use Auto Detect for an IPv6 Internet Connection on page 30
• Use Auto Config for an IPv6 Internet Connection on page 32
• Set Up an IPv6 6to4 Tunnel Internet Connection on page 33
• Set Up an IPv6 Pass Through Internet Connection on page 35
• Set Up an IPv6 Fixed Internet Connection on page 35
• Set Up an IPv6 DHCP Internet Connection on page 37
• Set Up an IPv6 PPPoE Internet Connection on page 39
6. Click the Apply button.
Your changes take effect.
Specify Your Internet Settings
29
To Next Page
Loading...
