EasyManuals Logo

NETGEAR RangeMax WPN824 User Manual

NETGEAR RangeMax WPN824
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
Reference Manual for the RangeMax Wireless Router WPN824
C-4 Preparing Your Network
202-10072-01, March 2005
Most operating systems include the software components you need for networking with TCP/IP:
•Windows
®
95 or later includes the software components for establishing a TCP/IP network.
Windows 3.1 does not include a TCP/IP component. You need to purchase a third-party TCP/
IP application package such as NetManage Chameleon.
Macintosh Operating System 7 or later includes the software components for establishing a
TCP/IP network.
All versions of UNIX or Linux include TCP/IP components. Follow the instructions provided
with your operating system or networking software to install TCP/IP on your computer.
In your IP network, each computer and the firewall must be assigned a unique IP addresses. Each
computer must also have certain other IP configuration information such as a subnet mask
(netmask), a domain name server (DNS) address, and a default gateway address. In most cases,
you should install TCP/IP so that the computer obtains its specific network configuration
information automatically from a DHCP server during bootup. For a detailed explanation of the
meaning and purpose of these configuration items, refer to “Appendix B, “Network, Routing,
Firewall, and Basics.”
The WPN824 router is shipped preconfigured as a DHCP server. The firewall assigns the
following TCP/IP configuration information automatically when the PCs are rebooted:
PC or workstation IP addresses—192.168.1.2 through 192.168.1.254
Subnet mask—255.255.255.0
Gateway address (the firewall)—192.168.1.1
These addresses are part of the IETF-designated private address range for use in private networks.
Configuring Windows 95, 98, and Me for TCP/IP Networking
As part of the PC preparation process, you need to manually install and configure TCP/IP on each
networked PC. Before starting, locate your Windows CD; you may need to insert it during the
TCP/IP installation process.
Install or Verify Windows Networking Components
To install or verify the necessary components for IP networking:
1. On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR RangeMax WPN824 and is the answer not in the manual?

NETGEAR RangeMax WPN824 Specifications

General IconGeneral
Bandwidth2.4 GHz
xDSL connectionYes
Dimensions (WxDxH)223 x 153 x 31 mm
Maximum data transfer rate0.108 Gbit/s
Security algorithmsWPA-PSK
Networking standardsIEEE 802.11b, IEEE 802.11g
Supports ISDN connectionNo
Ethernet LAN (RJ-45) ports4
Weight and Dimensions IconWeight and Dimensions
Weight500 g

Related product manuals