Reference Manual for the RangeMax Wireless Router WPN824
4-12 Wireless Configuration
202-10072-01, March 2005
How to Configure WPA-PSK Wireless Security
Note: Not all wireless adapters support WPA. Furthermore, client software is also required.
Windows XP and Windows 2000 with service pack 3 do include WPA support. Nevertheless, the
wireless adapter hardware and driver must also support WPA. For instructions on configuring
wireless computers or PDAs for WPA-PSK security, consult the documentation for the product
you are using.
To configure WPA-PSK, follow these steps:
1. Click Security Settings in the Setup section of the main menu and select WPA-PSK for the
Security Type.
Figure 4-7: WPA Settings menu
2.
Enter a word or group of 8-63 printable characters in the Password Phrase box.
3. Click Apply to save your settings.
To Next Page
Loading...
