Reference Manual for the RangeMax Wireless Router WPN824
3-12 Connecting the Router to the Internet
202-10072-01, March 2005
2.
For security reasons, the router has its own user name and password. When prompted, enter
admin for the router user name and password for the router password, both in lower case
letters. To change the password, see “Changing the Administrator Password” on page 6-9.
Note: The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
Once you have entered your user name and password, your Web browser should find the
WPN824 router and display the home page as shown in “Login result: WPN824 home page”
on page 3-7.
3. Click Setup Wizard on the upper left of the main menu.
4. Click Next to proceed. Input your ISP settings, as needed.
5. At the end of the Setup Wizard, click the Test button to verify your Internet connection. If you
have trouble connecting to the Internet, use the Troubleshooting Tips “Troubleshooting Tips”
on page 3-4 to correct basic problems, or refer to Chapter 7, “Troubleshooting.”
NETGEAR Product Registration, Support, and Documentation
Register your product at http://www.NETGEAR.com/register. Registration is required before you
can use our telephone support service.
Product updates and Web support are always available by going to:
http://kbserver.netgear.com/products/WPN824.asp.
Documentation is available on the CD and at
http://kbserver.netgear.com/documentation/WPN824.asp.
When the wireless router is connected to the Internet, click the Knowledge Base or the
Documentation link under the Web Support menu to view support information or the
documentation for the wireless router.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
