NETGEAR SXR80

Figure 4. Orbi Pro WiFi 6 satellite label
Connect your Orbi Pro WiFi 6 router
If you want to connect your Orbi Pro WiFi 6 router to an existing gateway, we recommend
that you turn off your existing gateway’s WiFi.
To cable your router:
1.
Unplug your modem’s power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery, and then put the battery
back in.
2. Plug in and turn on your modem.
3.
Connect your modem to the Internet port of your router with the Ethernet cable that
came with your router.
User Manual16Overview
Orbi Pro WiFi 6 Router SXR80 and Orbi Pro WiFi 6 Satellite SXR80