Initial Setup
23
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
2. Select the wireless mode in the 5 GHz band:
• 11
a. 802.11n-compliant devices can connect to the access point because they are
backward compatible.
• 1
1a-na-ac. This is the default setting. If you keep the default setting, go to Step 5.
When you change the wireless mode, the T
urn Radio On check box is automatically
cleared, and all fields, buttons, and menus on the page are masked out.
3. Turn on the radio by selecting the Turn Radio On check box.
A pop-up page displays.
Note: Under normal conditions, you want the radio to be turned on. Turning
off the radio disables access through the wireless access point, which
can be helpful for configuration, network tuning, or troubleshooting
activities.
4. Click OK to confirm the change of wireless mode.
The change does not take effect until you click the Apply button after you have
completed the wireless configuration.
To Next Page
Loading...
