For each radio band, the page also displays the current inbound and outbound
traffic loads, the average inbound and outbound traffic loads, and the peak inbound
and outbound traffic loads, each of which is expressed in kilobytes per second (KB/s),
is updated every three seconds, and covers a maximum period of three minutes.
7.
To display the traffic information for the wired connection, select the LAN tab.
The page displays traffic information for the LAN/PoE (model WAX214) or LAN/PoE+
(model WAX218) port, including the current inbound and outbound traffic loads,
the average inbound and outbound traffic loads, and the peak inbound and outbound
traffic loads, each of which is expressed in kilobytes per second (KB/s), is updated
every three seconds, and covers a maximum period of three minutes.
User Manual119Monitor the access point and its
Network Connections
NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
To Next Page
Loading...
