NETGEAR WAX214 - Mount Model WAX218 to a Solid Ceiling

4.
Line up the holes on the bottom of the access point with the screws in the wall and
mount the access point to the wall.
Mount model WAX218 to a solid ceiling
To mount the access point to a solid ceiling:
1. Using the anchors and screws provided, attach the 15/16 in. (23.8 mm) bracket with
the screw holes to the ceiling.
The rectangular protruding part of the bracket must be facing the ceiling.
2.
Hold the access point upside down with the front of the access point facing the
bracket.
User Manual149Mount Model WAX218 to a Wall
or Ceiling
NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218