Technical specifications
The following table shows the technical specifications of the access point. For more
information, see the product data sheet, which you can download by visiting
netgear.com/support/download/.
Table 13. Technical specifications model WAX214 and model WAX218
DescriptionFeature
Model WAX214:
12V, 1.5A (18W)
The plug is localized to the country of sale.
A power adapter is included for model WAX214PA but not for model WAX214.
Both models can operate with PoE power.
Power adapter
Model WAX218:
12V, 2.5A (30W)
The plug is localized to the country of sale.
A power adapter is included for model WAX218PA but not for model WAX218.
Both models can operate with PoE+ power.
Model WAX214:
If you do not use a power adapter, the LAN/PoE port requires 802.3af (PoE) power.
Maximum power consumption with PoE: 12.5W
Power over Ethernet
Note: PoE might be
considered a network
environment 0 per IEC TR
62101, and thus the
interconnected ITE circuits
might be considered safety
extra low voltage (SELV).
Model WAX218:
If you do not use a power adapter, the LAN/PoE+ port requires 802.3at (PoE+)
power.
Maximum power consumption with PoE: 19.5W
Model WAX214:
6.33 x 6.33 x 1.31 in. (160.9 x 160.9 x 33.3 mm)
Dimensions (L x W x H)
Model WAX218:
8.0 x 8.0 x 1.37 in. (205.7 x 205.7 x 35.8 mm)
Model WAX214:
0.84 lb (380 g)
Weight
Model WAX218:
1.73 lb (788 g)
32º to 104ºF (0° to 40°C)Operating temperature
0 to 90% maximum relative humidity, noncondensingOperating humidity
–22º to 176ºF (–30° to 80°C)Storage temperature
0 to 90% maximum relative humidity, noncondensingStorage humidity
User Manual139Factory Default Settings and
Technical Specifications
NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
To Next Page
Loading...
