NETGEAR WAX214 - Page 138

Table 12. Factory default settings model WAX214 and model WAX218 (Continued)
Default SettingFeature
DisabledHidden SSID
DisabledClient isolation
DisabledVLAN isolation
DisabledL2 isolation
DisabledBand steering
DisabledFast roaming
DisabledWiFi MAC filter
DisabledWiFi traffic shaping
2.4 GHz and 5 GHz radios
2.4 GHz radio: 20 MHz
5 GHz radio: 80 MHz
Channel HT mode
Automatic (Auto RF)Radio transmission power
The available channels and the default channel depend on the configured region
and country.
Channel
AutomaticBit rate
64 for each radioClient limits
EnabledMulticast to unicast stream
conversion
Enabled11ax mode
Other
Obtained automatically from the default NTP serverDate and time settings
DisabledSTP
Disabled (untagged)Management VLAN
DisabledSNMP
User Manual138Factory Default Settings and
Technical Specifications
NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218