EasyManua.ls Logo

NETGEAR WG602 - 54 Mbps Wireless Access Point

NETGEAR WG602 - 54 Mbps Wireless Access Point
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Manual for the WG602 v2 54 Mbps Wireless Access Point
D-4 Preparing Your PCs for Network Access
M-10181-03
DHCP Configuration of TCP/IP in Windows 98 and Me
In Windows 98 and Me systems, locate your Network Neighborhood icon.
If the Network Neighborhood icon is on the Windows desktop, position your
mouse pointer over it and right-click your mouse button.
If the icon is not on the desktop,
Click Start on the task bar located at the bottom left of the window.
Choose Settings, and then Control Panel.
Locate the Network Neighborhood icon and click it. This will open the
Network panel as shown below.
Verify the following settings as shown:
Client for Microsoft Network exists
Ethernet adapter is present
TCP/IP is present
Primary Network Logon is set to
Windows logon
Click the Properties button. The
following TCP/IP Properties window will
display.

Table of Contents

Related product manuals