NETGEAR WG602 - 54 Mbps Wireless Access Point User Manual

Reference Manual for the WG602 v2 54 Mbps Wireless Access Point
Preparing Your PCs for Network Access D-11
M-10181-03
Verifying TCP/IP Properties for Windows XP or 2000
To check your PC’s TCP/IP configuration:
1. On the Windows taskbar, click the Start button, and then click Run.
The Run window opens.
2. Type cmd and then click OK.
A command window opens
3. Type ipconfig /all.
Your IP Configuration information will be listed, and should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
• The IP address is between 192.168.0.2 and 192.168.0.254
• The subnet mask is 255.255.255.0
• The default gateway is 192.168.0.1
4. Type exit.

NETGEAR WG602 - 54 Mbps Wireless Access Point Specifications

General

Brand	NETGEAR
Model	WG602 - 54 Mbps Wireless Access Point
Category	Wireless Access Point
Language	English