Advanced Configuration 5-1
M-10181-03
Chapter 5
Advanced Configuration
This chapter describes how to configure the advanced features of your WG602 v2. These features
can be found under the Advanced heading in the main menu.
Configuring Wireless Bridge or Repeater Links
The 54 Mbps Wireless Access Point WG602 v2 lets you build large wireless networks.
Figure 5-1: Wireless Bridging Mode page
The wireless access point mode options enable these configurations:
• Repeater mode.
Note: The 54 Mbps Wireless Access Point WG602 v2 bridging and repeater modes are
only compatible with the NETGEAR WG602v2 and the NETGEAR WG302 Wireless
Access Points.
To Next Page
Loading...
