NETGEAR WG602 - 54 Mbps Wireless Access Point User Manual

Reference Manual for the WG602 v2 54 Mbps Wireless Access Point
Preparing Your PCs for Network Access D-7
M-10181-03
DHCP Configuration of TCP/IP in Windows XP
You will find there are many similarities in the procedures for different Windows systems when
using DHCP to configure TCP/IP.
The following steps will walk you through the configuration process for each of these versions of
Windows.
In Windows XP and 2000 systems, locate your Network Neighborhood icon.
• Select Control Panel from the Windows XP Start Menu.
• Select the Network Connections icon on the Control Panel. This will take you to the next
step.
Now the Network Connection window
displays.
The Connections List shows all the
network connections set up on the PC,
located to the right of the window.
• Right-click the Connection with the
wireless icon and choose Status.

NETGEAR WG602 - 54 Mbps Wireless Access Point Specifications

General

Brand	NETGEAR
Model	WG602 - 54 Mbps Wireless Access Point
Category	Wireless Access Point
Language	English