ReadySHARE Printer
66
N750 Wireless Dual Band Gigabit Router WNDR4300
USB Control Center Utility
The USB Control Center utility allows you to control a shared USB device from your computer
that is connected to the USB port on your router. The utility allows you to control a printer and
a scanner.
You have to install the utility on each computer on the network from which you want to control
the device.
You can download this utility for PC and Mac at
www.netgear.com/landing/en-us/readyshare.aspx.
When you launch the USB Control Center utility, a screen similar to the following displays:
The main screen shows a device icon, the description for this USB device, and its status.
Available.
The device is available from the computer that you are using.
Waiting to Connect.
You need to connect to this device from the computer that you are
using. If this is the first time you are connecting, you might be prompted to install the device
driver.
Menu selections:
• System. Exit the utility.
• T
ools. Access the Control Center Configuration screen to set up your shared USB
device. See the following section, Control Center Configuration.
• About. V
iew details about the USB Control Center software.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
