EasyManuals Logo

NETGEAR WNDR4300 User Manual

NETGEAR WNDR4300
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
Troubleshooting
119
N750 Wireless Dual Band Gigabit Router WNDR4300
example, the router cannot convert ADSL or cable data into Ethernet networking
information. NETGEAR does not support such a configuration.
Cannot Access the Internet
If you can access WNDR4300 router but not the Internet, check to see if the router can obtain
an IP address from your Internet service provider (ISP). Unless your ISP provides a fixed IP
address, your router requests an IP address from the ISP. You can determine whether the
request was successful using the Router Status screen.
To check the WAN IP address:
1. Start your browser, and select an external site such as www.netgear.com.
2. Access the router interface at www.routerlogin.net.
3. Select Administration > Router Status.
4. Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router has
not obtained an IP address from your ISP.
If your router cannot obtain an IP address from the ISP, you might need to force your cable or
DSL modem to recognize your new router by restarting your network, as described in
Sequence to Restart Your Network on page 116.
If your router is still unable to obtain an IP address from the ISP, the problem might be one of
the following:
Your Internet service provider (ISP) might require a login program.
Ask your ISP whether it requires PPP over Ethernet (PPPoE) or some other type of login.
If your ISP requires a login, the login name and password might be set incorrectly.
Your ISP might check for your computer’s host name.
Assign the computer host name of your ISP account as the account name in the Internet
Setup screen.
Your ISP allows only one Ethernet MAC address to connect to Internet and might check
for your computer’s MAC address. In this case, do one of the following:
- Inform your ISP that you have bought a new network device, and ask them to use the
router’s MAC address.
- Configure your router to clone your computer’s MAC address.
If your router can obtain an IP address, but your computer is unable to load any web pages
from the Internet:
Your computer might not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www
addresses) to numeric IP addresses. Typically, your ISP provides the addresses of one or
two DNS servers for your use. If you entered a DNS address during the router’s
configuration, reboot your computer, and verify the DNS address. You can configure your
computer manually with DNS addresses, as explained in your operating system
documentation.

Table of Contents

Other manuals for NETGEAR WNDR4300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WNDR4300 and is the answer not in the manual?

NETGEAR WNDR4300 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)450 Mbit/s
Bandwidth2.4 GHz
Rack mounting-
xDSL connectionNo
Dimensions (WxDxH)218 x 160 x 35 mm
USB ports quantity1
Minimum system requirements- Internet Explorer 5.0, Firefox 2.0, Safari 1.4, Google Chrome 11.0
WLAN data transfer rates supported300, 450 Mbit/s
Ethernet LAN (RJ-45) ports5
Supported network protocolsIPv6
Security algorithmsWPA-PSK, WPA2-PSK
Flash memory128 MB
Certification- RoHS
Product colorBlack
Cables includedLAN (RJ-45)
Windows operating systems supportedWindows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Professional
Weight and Dimensions IconWeight and Dimensions
Depth160 mm
Width218 mm
Height35 mm
Weight450 g

Related product manuals