EasyManuals Logo

NETGEAR WNR1000v3 - Wireless- N Router Setup Manual

NETGEAR WNR1000v3 - Wireless- N Router
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
Technical Specifications 34
Restoring the Default Password and Configuration
Settings
You can restore the factory default configuration settings that reset the router’s user name to
admin, the password to password, and the IP address to 192.168.1.1.
To restore the factory default configuration settings:
1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
button, located on the rear panel of the router, for about 5 seconds, until the Power light begins
to blink (see “Back Panel” on page 4).
2. Release the restore factory settings button, and wait for the router to restart, and for the Power
light to stop blinking and become solid green.
The factory default settings will be restored so that you can access the router from your Web
browser using the factory defaults.
This procedure will erase all the current configuration settings and restore the factory
defaults.

Other manuals for NETGEAR WNR1000v3 - Wireless- N Router

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WNR1000v3 - Wireless- N Router and is the answer not in the manual?

NETGEAR WNR1000v3 - Wireless- N Router Specifications

General IconGeneral
WiFi Technology802.11n
WiFi SpeedUp to 150 Mbps
Frequency Band2.4 GHz
Power Supply12V DC, 0.5A
SecurityWPA, WPA2
Weight0.44 lb (0.2 kg)
Ethernet Ports4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN
Dimensions173 x 128 x 28 mm

Related product manuals