NETGEAR WNR1000v3 - Wireless- N Router Setup Manual

Installing Your Router Using the Smart Wizard 10
Accessing Your Router After Installation
The Smart Wizard only appears when you first install the router or when the router is in its factory
default state (for example, if you have reset the router to its default factory settings). If you want to
change the settings after installing and configuring your router using the Smart Wizard, you must
open a browser window and log in to the router. You will also be prompted to check for new router
firmware. For more information, see “Configuring Your Wireless Network” on page 20.

NETGEAR WNR1000v3 - Wireless- N Router Specifications

General

WiFi Technology	802.11n
WiFi Speed	Up to 150 Mbps
Frequency Band	2.4 GHz
Power Supply	12V DC, 0.5A
Security	WPA, WPA2
Weight	0.44 lb (0.2 kg)
Ethernet Ports	4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN
Dimensions	173 x 128 x 28 mm