NetModule NB2800 - Page 151

NB2800
User Manual for NRSW version 4.5.0.100
5.7.10. SNMP Agent
NetModule routers are equipped with an SNMP daemon, supporting basic MIB tables (such as ifTable),
plus additional enterprise MIBs to manage multiple systems.
Parameter Supported MIBs
.1.3.6.1.2.1 MIB-II (RFC1213), SNMPv2-MIB (RFC3418)
.1.3.6.1.2.1.2.1 IF-MIB (RFC2863)
.1.3.6.1.2.1.4 IP-MIB (RFC1213)
.1.3.6.1.2.1.10.131 TUNNEL-MIB (RFC4087)
.1.3.6.1.2.25 HOST-RESOURCES-MIB (RFC2790)
.1.3.6.1.6.3.10 SNMP-FRAMEWORK-MIB
.1.3.6.1.6.3.11 SNMPv2-SMI (RFC2578)
.1.0.8802.1.1.2 LLDP-MIB
.1.0.8802.1.1.2.1.5.4795 LLDP-EXT-MED-MIB
.1.3.6.1.4.1.31496 VENDOR-MIB
The VENDOR-MIB tables offer some additional information over the system and its WWAN, GNSS
and WLAN interfaces. They can be accessed over the following OIDs:
Parameter Vendor MIB OID Assignment
NBAdminTable .1.3.6.1.4.1.31496.10.40
NBWwanTable .1.3.6.1.4.1.31496.10.50
NBGnssTable .1.3.6.1.4.1.31496.10.51
NBDioTable .1.3.6.1.4.1.31496.10.53
NBWlanTable .1.3.6.1.4.1.31496.10.60
NBWanTable .1.3.6.1.4.1.31496.10.22
They offer facilities for:
– rebooting the device
– updating to a new system software via FTP/TFTP/HTTP
– updating to a new system configuration via FTP/TFTP/HTTP
– getting WWAN/GNSS/WLAN/DIO information
Our VENDOR-MIB is listed in the appendix or can be downloaded directly from the router.
151