NB2800
User Manual for NRSW version 4.5.0.100
SNMP Configuration
Configuration Authentication
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
SDK
Administration
Job Management
Testing
DHCP Server
DNS Server
NTP Server
Dynamic DNS
E-mail
Events
SMS
SSH/Telnet Server
SNMP Agent
Web Server
Softflow
Discovery
Redundancy
Voice Gateway
SNMP Agent Configuration
Administrative status:
enabled
disabled
Operation mode:
v1 | v2c | v3 v3 only
Contact:
Location:
Listening port:
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
Figure 5.45.: SNMP Agent
The following parameters can be used to configure the SNMP agent:
Parameter SNMP Configuration
Administrative status Enable or disable the SNMP agent
Operation mode Specifies if agent should run in compatibilty mode or for SNMPv3 only
Contact System maintainer or other contact information
Location Location of the device
Listening Port SNMP agent port
Once the SNMP agent is enabled, SNMP traps can be generated using SDK scripts.
152
To Next Page
Loading...
