NB3700 User Manual 3.8
5.7.13. Voice Gateway
Depending on your hardware, you can set up a voice gateway on the router which can
be used to connect mobile calls to VoIP clients and vice versa.
Administration
Figure 5.49.: Voice Gateway Administration
The following parameters can be used to set it up:
Parameter Voice Gateway Administration Settings
Administrative status Specifies whether the gateway shall be enabled or disabled
Call routing Defines who will be responsible for call routing. If SDK has
been specified you would need to install a script (see ex-
amples) which will be responsible for routing and accepting
the calls. Otherwise the static routing configuration will be
used.
SIP status Specifies whether the SIP agent will be enabled or disabled
130
To Next Page
Loading...
