NB3700 User Manual 3.8
5.1.1. Initial Access
In factory state you will be prompted for a new administrator password. Please choose
a password which is both, easy to remember but also robust against dictionary attacks
(such as one that contains numbers, letters and punctuation characters). The password
shall have a minimum length of 6 characters. It shall contain a minimum of 2 numbers
and 2 letters.
Figure 5.1.: Initial Login
Please note that the admin password will be also applied for the root user which can be
used to access the device via the serial console, telnet, SSH or to enter the bootloader.
You may also configure additional users which will only be granted to access the summary
page or retrieve status information but not to set any configuration parameters.
A set of services (USB Autorun, CLI-PHP) are by default activated in factory state
and will be disabled as soon as the admin password has been set. They can be enabled
again afterwards in the relevant sections. Other services (SSH, Telnet, Console) can be
accessed in factory state by providing an empty or no password.
24
To Next Page
Loading...
