NB3700 User Manual 3.8
WLAN Configuration
Running in client mode, it is possible to connect to one ore more remote access-points.
The system will switch to the next network in the list in case one goes down and
return to the highest-prioritized network as soon as it comes back. You can perform
a WLAN network scan and pick the settings from the discovered information directly.
The authentication credentials have to be obtained by the operator of the remote access
point.
Running in access-point mode you can create up to 4 SSIDs with each running their own
network configuration. The networks can be individually bridged to a LAN interface or
operate as dedicated interface in routing-mode.
Figure 5.13.: WLAN Configuration
48
To Next Page
Loading...
