NB3700 User Manual 3.8
5.3.7. Digital I/O
The Digital I/O page displays the current status of the I/O ports and can be used to
turn output ports on or off.
Figure 5.19.: Digital I/O Ports
You can apply the following settings:
Parameter Digital I/O Settings
DO1 after reboot Initial status of DO1 after system has booted
DO2 after reboot Initial status of DO2 after system has booted
Besides on and off you may keep the default status as the hardware has initialized it
after power-up.
The digital inputs and outputs can also be monitored and controlled by SDK scripts.
58
To Next Page
Loading...
