NB3700 User Manual 3.8
Event Description
sms-to-serial.are This script can be used to write a received SMS to the serial
port.
snmp-agent.are This script extends MIB entries of the SNMP agent
snmp-cmd.are This script issues SNMP set/get commands
snmp-trap.are This script can be used to send SNMP traps
status.are This script can be used to display all status variables
syslog.are Throw a simple syslog message.
tcpclient.are This script sends a message to a TCP server.
tcpserver.are This script implements a TCP server which is able to receive
messages.
techsupport.are This transfers a techsupport to a remote FTP server
transfer-file.are This scripts archives a remote file
transfer.are This scripts stores the latest GNSS positions in a remote
FTP file
udp-msg-server.are This script will run an UDP server which is able to receive
messages and forward them as SMS/E-Mail.
udpclient.are This script sends a message to a remote UDP server.
udpserver.are This script implements an UDP server which is able to re-
ceive messages.
update-config.are This script can be used to perform a configuration update
voice-dispatcher-
audio.are
This script implements an audio voice dispatcher
webpage.are This script will generate a page which can be viewed in the
Web Manager
write-config.are This script can be used to set a configuration parameter.
Table A.3.: SDK Examples
194
To Previous Page
Loading...
