NetModule NB3700 - Page 193

NB3700 User Manual 3.8
Event Description
modbus-tcp-rtu-
gateway.are
This script implements a Modbus TCP RTU gateway
mount-media.are This script can be used to mount an USB storage stick.
ping-supervision.are This script will supervise a specified host.
read-config.are This script can be used to read a configuration parameter.
remote-mail.are This script reads and sends mails from a remote
IMAP/POP3/SMTP server
scan-mobile.are This script can be used to switch the Mobile LAI according
to available networks
scan-wlan.are This script can be used to switch the WLAN client network
according to availability
send-mail.are This script will send an E-Mail to the specified address.
send-sms.are This script will send an SMS to the specified phone number.
serial-read.are This script can be used to read messages from the serial
port.
serial-readwrite.are This script will write to and read from the serial port.
serial-tcp-broadcast.are This script reads messages coming from the serial port and
forwards them via TCP to remote hosts (and vice versa).
serial-tcsetattr.are This script can be used to set/get the attributes of the serial
port.
serial-udp-server.are This script reads messages coming from the serial port and
forwards them via UDP to a remote host (and vice versa).
serial-write.are This script can be used to write a message to the serial port.
set-ipsec-route.are set route to IPSEC server depending on active WWAN /
WLAN network
sms-confirm.are This script will send out a message and confirm its delivery.
sms-control.are This script will execute commands received by SMS.
sms-delete-inbox.are This script can be used to flush the SMS inbox.
sms-read-inbox.are This script can be used to read the SMS inbox.
sms-to-email.are This script will forward incoming SMS messages to a given
E-mail address.
193