NB3700 User Manual 3.8
If the USB/IP device server has been enabled you can discover the mounted USB devices
and attach them to the USB/IP server. Enabled devices can now be exported to a remote
host. You will need an additional driver on the client for which we provide Windows or
Linux drivers. Further installation instructions can be provided on demand.
Please note that some USB devices behave latency-sensitive which may raise problems
when operating over a slow IP connection. Some devices may generally not work with
the USB/IP driver. Please contact our support in case of compatibility issues.
USB Devices
This page show the currently connected devices and it can be used to enable a specific
device based on its Vendor and Product ID. Only enabled devices will be recognized by
the system and raise additional ports and interfaces.
Figure 5.16.: USB Device Management
Parameter USB Devices
Vendor ID The USB Vendor ID of the device
Product ID The USB Product ID of the device
53
To Next Page
Loading...
