NB3700 User Manual 3.8
Please note that the specified rules are processed by order, that means, traversing the
list from top to bottom until a matching rule is found. If there is no matching rule
found, the packet will pass as is.
Parameter Inbound NAPT Rules
Description A meaningful description of this rule
Incoming interface The interface from which matching packets are received
Target address The destination address of matching packets (optional)
Protocol The used protocol of matching packets
Ports The used UDP/TCP port of matching packets
Redirect to The address to which matching packets shall be redirected
Redirect port The port to which matching packets will be redirected
NAPT Outbound Rules
Outbound rules will modify the source section of IP packets and can be used to establish
1:1 NAT mappings but also to redirect packets to a specific service.
Parameter Outbound NAPT Rules
Description A meaningful description of this rule
Incoming interface The outgoing interface on which matching packets are leav-
ing the router
Source address The source address of matching packets (optional)
Protocol The used protocol of matching packets
Ports The used UDP/TCP port of matching packets
Rewrite source address The address to which the source address of matching packets
shall be rewritten
Rewrite source port The port to which the source port of matching packets shall
be rewritten
78
To Next Page
Loading...
