Netum NT-9600 User Manual

7
Set corresponding receiver
ID
Set transmitter reporting to a named
receiver.
e.g.: NT 122=200#,
set corresponding receiver ID 200.
Range: 1-254, end with #.
1#, 2#...
…100#, …
254#
Set beeper
Activate or deactivate beeper
function to indicate whether or not
the signals are received during
uploading data.
Signals received: 1 beep
Signals not received: 3 consecutive
beeps
Note: this function will affect
scanning speed. Scanning speed is 1
code per second when it is activated
and 3 codes per second when not.
Range: 2#, 3#.
2#
3#
Restore all original
transmitter settings
Restore this module to original
settings.
Save& Exit
Scanner receiver setting
Enter setting
Setting Code
Description
Note
Set receiver channel
Set receiver channel: e.g.: NT
211 = 10#, set working channel
10. Range: 00-15, end with #.
0#
1#
…
15#
Set receiver ID
Set receiver ID: e.g.: NT
221=100#, set transmitter ID
200. Range: 1-254, end with #.
1#
2#
… 100#, …
254#

Netum NT-9600 Specifications

General

Brand	Netum
Model	NT-9600
Category	Barcode Reader
Language	English