Netum NT-9600 - Page 9

9
scanned.
Disable repeated code
detection
Disable repeated
code detection.
Note: this setting
will be
automatically saved
and remain
effective after
power failure.
The above detecting time can be adjusted by scanning the following codes:
(default: 6 seconds)
Enter setting
Set detecting time 6 seconds
Set detecting time 5 seconds
Set detecting time 4 seconds
Set detecting time 3 seconds
Set detecting time 2 seconds
Set detecting time 1 seconds
Save & Exit
Appendix – 1
0 – 9, #, TEST 1234567890
0 1