3. Press B to toggle between “Armed”
and “Omitted”. If a low tone is generated
when pressing “B” then the selected circuit
cannot be programmed into the 24Hr
group.
4. Repeat from step 2 for other circuits,
when finished press ] to abandon this
option and return “User menu 2".
Print System Log - [2.7]
Thesystem log stores700events(1800 when expanded),ifa printerisconnectedto thesystemit
is possible to print a selected number of events. Once the printout has been started it can only
be stopped by selecting this option again and entering “000” for the number of events.
1. Ensure that “User menu 2" is selected.
Press 7 to select the P rint System Log
option. The display will show:
2. Enterthe number of eventsto be printed
000-699 (0000-1799 if expanded), e.g.,
enter “150" for the last 150 events, starting
with the most recent event. The display will
show:
3. Press [ to start printing, the display will
automatically return to “User menu 2". To
Cancel printing repeat from step 1 and
select ”000" (“0000" if expanded) events at
step 2.
+
If the printer is left connected to the system it will printout system events as and when they
occur (real time printout).
29
TS790 & TS90 0 User Manual User Menu 2
Print System Log
No. events> ---
LCD
-- -
Starburst
---
LED
Print System Log
No. events> 150
150
150
10-O
CCT 10-O
Loading Bay Door
CCT 10 Omitted
To Next Page
Loading...
