Networker TS790 - User Menu 2 (Continuation); Remote Call Back - [2.0] (Continuation); Initiate Remote Service Call - [2.A]

Initiate Remote Service Call - [2.A]
If your alarm system is fitted with a modem, it is possible for a master user to initiate an upload
sequence to a remote site (normally the alarm company or central station). Once the
communication link is established, the remote site can read and write data from the control
panel. This feature is only compatible with Menvier Lineload software version 2.0 or above.
+
Only select this option when requested by the installation company, if this option is
selected without authorisation from the installation company the modem may not
connect with the remote site.
To initiate a Remote Service Call, proceed as follows:
1. Ensure that “User menu 2" is selected.
Press A to select the In i tiat e R emot e
Service Call option. The display will show:
2. Select the telephone number you
require to call, by pressing:
1 to call number 1
2 to call number 2
3 to call number 3
e.g., to select remote site 2 press “2".
The display will show:
3. Press[ toinitiatetheuploadsequence
to the remote site or press ] to abandon
this option.
34
User Menu 2 TS790 & TS900 User Manual
CALL NO.1
Starburst
No
.
1
LED
Call Number 2
0181 12345679
CALL NO.2
No
.
2
Call Number 1
0181 12345678
LCD