Networker TS790 - User Names (TS900 Remote Keypads Only) - [3.4]; Edit Text for Part Set Groups (TS900 Remote Keypads Only) - [3.5]

U ser Names (TS900 Remote Keypads Only) - [3.4]
This option allows the master user to assign up to seven characters of text against each user
passcode. When viewing the log, users that have a name programmed appear in the event
description, e.g., "PASSCODE Fred". If the user name is left blank the event description will show
the user number, e.g., ”PASSCODE 01".
When this menu option is selected the keypad operates in a text mode, see page 44 for full
details.
To program the user names proceed as follows:
1. Ensure that “User menu 3" is selected. Press 4 to select
the Us er Name option. The display will show:
2. Enter the user number 01-31, e.g., enter "01" for user 01,
then press [ . The display will show:
3. Use the keypad keys to program text (see page 44).
Whenthedisplayshowstherequired textpress[ to accept
or press ] to abandon and return to step 1. Repeat for the
other “User Names” or press ] to return to “User menu 3".
Edit Text For Part Set Gro ups (TS9 00 Remot e Key pads Only) - [3.5]
When the system is being part-set using the part-set button A, B or C the display will show the
default message of “Part set group A (B or C)”. This message can be changed using up to 32
characters, e.g., “Part set group A” may be changed to “Setting Office area only”.
When this menu option is selected the keypad operates in a text mode, see page 44.
To program the part-set text name proceed as follows:
1. Ensure that “User menu 3" is selected. Press 5 to select
theEditTe xtfo rPartSetGroupsoption.Thedisplaywillshow:
2. Select the “Part set Group” by pressing:
A for “Part set Group A”
B for “Part set Group B”
C for “Part set Group C”
e.g., to select “Part set Group A” press
“A”. The display will show:
3. Use the keypad keys to program text (see page 44).
When the display shows the required text press [ to
accept. The displaywill return to step 1. Repeat forthe other
“Part set Groups” or press ] to return to “User menu 3".
41
TS790 & TS90 0 User Manual User Menu 3
Edit Text For
User No. > --
LCD
->User 01
^
Edit Text For
Part set Group ?
LCD
^art set Group A