Introduction
The TS790 and TS900 are advanced security alarm control systems using state of the art
electronics to provide comprehensive but flexible protection for both domestic and
commercial premises. The system comprises of a number of components linked to a central
control unit which is concealed from view but accessible for maintenance. The TS790 can
monitor from 10 to 16 detection circuits whereas the TS900 can monitor a maximum of 56.
Both systems canbe operated from up tofourremote keypadswhich maybe oneoffourtypes.
Detection devices such as door contacts or movement sensors are allocated to detection
circuits which are identified on the remote keypad displays. All detection circuits may then be
allocated to the whole system or grouped into “Wards” (areas) so that access to certain areas
can be controlled independently.
A modem can also be connected to the alarm system via the telephone line to allow remote
interrogation,programming and resettingofalarms.Thisfeatureisknown as“Downloading”and
is normally performed by the installation company or central station.
Each alarm installation is specific to the site and its occupier and may differ from other
TS790/TS900 installations. This manual describes in detail all the functions and procedures
available to the user, however, not all these may be relevant to the way your system isset up. To
avoid unnecessary operating errors please discuss the details of the alarm system with your
installation company before attempting to use it. Also ensure that installation company
complete the system record sheets at the back of this manual and fill in the details required
within the section called “Operating The System”.
1
TS790/ TS900 User Manual Overvi ew
To Next Page
Loading...
