Newall DP8 - Page 19

Standard Functions
Newall Measurement Systems
18
STANDARD FUNCTIONS
Set absolute zero at the lower left corner of the part
0.0000
ABS
0.0000
Xo
abs
inc
Zo
Move to the first position in ABS (Hole A).
30.000
ABS
30.000
Switch to Incremental and Zero the display
0.000
INC
0.000
Move to the second position in ABS (Hole B).
150.000
ABS
100.000
abs
inc
Make an Incremental move to Hole C.
0.000
INC
50.000
Press the [ ABS/INC ] key to return the ABS mode.
150.000
ABS
150.000
abs
inc
X
Y
Xo
Yo
X
Y
X
Y
X
Y
abs
inc
X
Y
Using the DP8 display in the manner given above can save considerable time as the operator can
avoid time consuming math calculations.