EasyManua.ls Logo

Newport 8000 - Page 16

Newport 8000
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 General Information 3
Combination LDD/TEC Modules Offer Full Laser Control In
A Single Package
When temperature stabilization is required, the 8600 series Combination LDD/TEC
module gives you full control of your laser diodes. The TEC section temperature
stabilizes your laser diode. On the LDD section, an internal function generator
provides sine and square wave modulation.
Comprehensive Safety Features Protect Your Laser Diode
Time tested laser diode protection safety features are incorporated into every Laser
Diode Driver offered. Input power module filters provide first stage protection
against transients. Additional filtering and power regulation stages coupled with high
speed transient detection circuits let you operate your laser diode worry free from
transients. A slow turn-on sequence, multiple output shorting circuits, and an
independent current limiting feature provide the superior protection you demand
from all your laser diode instrumentation.
Intuitive Controls and Large Graphics Display Simplify
Control and Test Procedures
Improved data presentation and system control are achieved using a large graphics
display. A MASTER display shows the entire system configuration as well as each
module’s status. “Soft Keys” guide you through initial system setup routines and the
operation of each module. Real-time control of an output is accomplished either by
entering the set point on the keypad or via the control knob. MENU and FUNC keys
access saved system configurations and repetitive procedures. All controls are
clearly marked and instructions easily understood for simple operation.
GPIB/IEEE-488.2 and RS232 Interfaces Gives Power to
Remotely Control and Collect Data.
For ultimate control a GPIB/IEEE-488.2 interface is available. All control and
measurement functions are accessible via the GPIB interface. In addition, standard
serial RS-232C input and output ports allow several of the mainframes to be
connected together to build large test and characterization stations. As your
instrumentation needs change the Model 8000 Modular Controller will adapt to all
your new laser diode applications giving you the ultimate in flexible laboratory
equipment.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents

Related product manuals