9.
Specifications
9.1
Model 8000 Modules
9.1.1 8540M MOPA Laser Diode Driver Module
Specifications Oscillator Amplifier
Laser Output
Output Current Range (mA) 0 to 500 mA 0 to 4,000 mA
Output Current Resolution (mA) 0.0076 0.0610
Output Current Accuracy
1
0.03 + 15 µA 0.03 + 120 µA
Compliance Voltage 5 Volts 5 Volts
Temperature Coefficient (Full Scale) < 50 ppm/°C < 50 ppm/°C
Short Term Stability (1 hr., Full Scale) < 10 ppm < 10 ppm
Long Term Stability (24 hr., Full Scale) < 50 ppm < 50 ppm
Noise/Ripple (rms)
2
< 4.0 µA < 10 µA
Current Limit
Range 0 to 500 mA 0 to 4,000 mA
Resolution 1 mA 1 mA
Accuracy ± 2 mA ± 5 mA
Analog Modulation
3
Input range, Input Impedance 0 to 10V, 10k
Ω
0 to 10V, 10k
Ω
Transfer Function 50 mA/V 400 mA/V
Bandwidth (3 dB ± 10%) DC to 500 kHz DC to 100 kHz
Midband Crosstalk > 40 dB below > 10 dB below
Amplifier Signal Oscillator Signal
Photodiode Input
Temperatire Coefficient (% Full Scale/°C) N/A < 0.02
Range N/A 0 - 20 mA
Stability (Full Scale, 24 hours) N/A ± 0.02 %
Accuracy
1
N/A 0.004 + 1 µA
Photodiode Reverse Bias (± 10%) N/A 5 Volts
Measurement Display
Output Current Range (mA) 0 to 500.00 0 to 4,000.0
Output Current Resolution (mA) 0.01 0.1
Output Current Accuracy
1
0.02 + 20 µA 0.02 + 200 µA
Forward Voltage Range (Volts) 0.000 to 5.000 0.000 to 5.000
Forward Voltage Resolution (mV) 0.1 0.1
Forward Voltage Accuracy
1
0.005 + 0.3 mV 0.005 + 0.3 mV
Photodiode Current Range (µA) N/A 15 - 20,000
Photodiode Current Resolution (µA) N/A 0.1
Photodiode Current Accuracy
1
N/A 0.01 + 1 µA
PD Resp. Range (µA/mW) N/A 0.00 to 600.00
PD Resp. Resolution (µA/mW) N/A 0.01
Optical Power Range (mW) N/A 0.00 to 4000.0
1
± (% reading + fixed error)
2
True RMS, 3Hz to 300 kHz, ½ full scale, resistive load
3
Modulation input can be switched in setup screen to either master oscillator or power amplifier
section - only one section can be modulated at a time.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
