EasyManua.ls Logo

Newport 8000 - Symbols; General Warnings and Cautions

Newport 8000
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 Chapter 1 General Information
1.4.2 Symbols
The following symbols are used in this manual and on the instrument:
!
Refer to the documentation.
Earth Ground
1.5 General Warnings and Cautions
The following general warning and cautions are applicable to this instrument:
WARNING
This instrument is intended for use by qualified personnel
who recognize shock hazards or laser hazards and are
familiar with safety precautions required to avoid possible
injury. Read the instruction manual thoroughly before
using, to become familiar with the instrument’s operations
and capabilities.
WARNING
The American National Safety Institute (ANSI) states that
a shock hazard exists when probes or sensors are exposed
to voltage levels greater then 42 VDC or 42V peak AC.
Do not exceed 42V between any portion of the Model
8000 (or any attached detector or probe) and earth ground
or a shock hazard will result.
CAUTION
There are no serviceable parts inside the Model 8000.
Work performed by persons not authorized by Newport
Corporation may void the warranty. For instructions on
obtaining warranty repair or service please refer to
Chapter 7 of this manual.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents

Related product manuals