Chapter 2 System Operation 17
Invert
inverts screen to be white on black rather than black on white.
Lockout dial
disables the dial to avoid accidental changes in active data fields when
the dial is bumped.
Lockout pad
locks out the data entry portion on the keypad. Navigation keys, such
as up and down,
MENU
, and
MASTER
continue to work.
Note that both the Lockout dial and Lockout pad settings are temporarily suspended
while in the Configure System Screen, allowing the dial and keypad lockout settings
to be changed while in this screen..
Audible Beep
controls the system’s audible beeper. The beeper indicates errors,
invalid data entry, and other situations where the 8000 needs to alert the user.
On Delay
controls the delay time from the moment a Laser Diode Driver is turned on
by the user to the actual time the output is energized. The delay time is
programmable from 0 seconds to 30 seconds. The default setting is 3 seconds.
Key Rate
- this controls the speed at which, when a key is held down, it repeats.
Settings are
Slow
,
Medium
, and
Fast
.
Dial Rate
- like the
Key Rate
setting, this controls the acceleration of the dial as it is
turned. Settings are
Slow
,
Medium
, and
Fast
.
Dial Tick
- when set to
Yes
, the dial will produce a tick sound for each increment or
decrement of the dial.
Master
- this controls the format of dual and combo modules on the master display
(see section 2.4.4). Settings are
Expanded
and
Condensed
.
2.4.8 Save/Recall Screen
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
